On the lookout for a way to jazz up your wall art? Try out building your individual Do-it-yourself acrylic frames for individualized 3D artwork. This write-up will stroll you by means of exactly how I created these in my residence.
If you are wanting for a personalized way to frame your photographs or artwork to make it stand out from the wall, these Do-it-yourself acrylic frames are the great detail.
I landed on these frames due to the fact I needed a little a little something to increase a small extra pizzazz to my bathroom wall. 
We determined to incorporate my husband&rsquos enjoy of golf into the combine by printing pics he took of PGA golfing courses he&rsquos performed in black and white.
I love when art is a conversation piece, so this was the best addition to the lavatory wall.
To make it really stand out, I created these Do-it-yourself acrylic frames for each individual of the photos.
Listed here are the ways I took&hellip 
Table OF CONTENTS
- one. Assemble your products.
- two. Tape each facet of each corner.
- three. Mark the place you want to drill your holes.
- 4. Drill your holes.
- 5. Use your glue dots to secure your pictures to the body.
- 6. Mark the complete on the wall exactly where you approach to hang it.
- seven. Use your punch software to mark the full on the wall.
- eight. Drill your holes in the wall.
- nine. Screw the standoffs into the wall.
- ten. Connect your frame to the standoffs.
- 11. Revel in the concluded merchandise!
Disclaimer: This submit does consist of affiliate hyperlinks for your ease. This is at NO supplemental price to you but earns me a compact fee. To study far more, verify out our disclosure coverage.
one. Acquire YOUR Resources.
To start with items to start with, collect all your components. All resources for almost everything I made use of are linked underneath. I also incorporated a list with one-way links of what we utilized to hang the frames, also. 
FOR Creating THE Do it yourself ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (one for the size of the opening of your standoffs and 1 for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Device (I used a Sharpie)
FOR HANGING THE Do it yourself ACRYLIC FRAMES:
- Pencil
- Handheld Level
- Punch
- Screwdriver
2. TAPE Each and every Side OF Just about every CORNER.
Plexiglass/acrylic is pretty fragile.
Due to the fact of this, you have to be quite careful when you are drilling the holes.
Inserting a piece of painter&rsquos tape on both aspect wherever you prepare to drill your hole will assistance hold the acrylic sheet from breaking or cracking when you drill.
I also kept the protecting deal with on each individual aspect of the piece, too.
3. MARK Wherever YOU WANT TO DRILL YOUR HOLES.
At the time you have put the painter&rsquos tape on all 4 sides (or nonetheless a lot of spots you plan to drill a gap), you can put a mark of where by you want to drill your gap.
I drilled my holes 1&Primary in from just about every edge as you can see from the image previously mentioned.
4. DRILL YOUR HOLES.
In advance of in fact drilling, double and triple test that your marks are level each horizontally and vertically.
You&rsquoll want to have these stage for when you dangle them. 
The drill little bit you pick should be massive ample to permit the standoff to healthy in the gap.
I would do a examination operate on a piece of scrap product to make confident it is major sufficient. 
Once you are selected that the marking are degree and the little bit is huge enough, you want to get started drilling.
Here is a fantastic online video to follow if you would like a demonstration on how to drill by means of acrylic.
You want to use about 50 percent energy when you are drilling.
Slow and steady. If you go to speedy, the acrylic will crack, so acquire your time.
As you drill you need to see spirals of the acrylic slowly but surely remaining eliminated. 
Repeat the drilling for each hole you have to have.
5. USE YOUR GLUE DOTS TO Protected YOUR Photos TO THE Frame.
The moment your holes are developed, you can incorporate your photo to the piece of acrylic/body.
The essential in this article is to again, make positive your photo is level prior to you completely secure it to the body.
The glue dots are pretty sticky and don&rsquot allow for for a whole lot of wiggle area, so it may perhaps be a great strategy to line up a piece of lined paper at the rear of the body to support you line the edges of your picture.
Whichever trick operates for you to make certain the photograph will get glued to the body level will do. 
six. MARK THE Complete ON THE WALL The place YOU Prepare TO Dangle IT.
As you start off to hang, mark your holes on the wall, but make sure your body is amount.
If you measured effectively in the phase right before drilling, the holes on your body really should presently be stage.
If you are hanging more than one body like I did, make absolutely sure just about every frame is stage in your grid, far too. 
7. USE YOUR PUNCH Instrument TO MARK THE Full ON THE WALL.
I like this instrument so considerably simply because it receives your hole began and lets your drill to keep in position when you start drilling.
If you don&rsquot have 1, I remarkably endorse it!
8. DRILL YOUR HOLES IN THE WALL.
Be guaranteed to use a bit that fits the screws that came alongside with your standoffs.
This will most probably be a lesser little bit than the 1 you made use of on the frames.
I also utilized a stud finder to see if I needed drywall anchor s, but mainly because these frames are not that hefty, you could likely do with out them.
9. SCREW THE STANDOFFS INTO THE WALL.
At the time you obtain your standoffs, you&rsquoll see how they do the job.
In get for the picture to &ldquostand off&rdquo the wall, you have to safe the standoff with the supplied screw in advance of attaching the photo to the standoffs.
As you can see from the photo, earning certain anything is amount and calculated appropriately is tremendous significant. 
ten. Connect YOUR Body TO THE STANDOFFS.
After you&rsquove attached the standoffs, it&rsquos time to attach the shots!
Line up the standoffs with your drilled holes and protected the standoffs.
If all goes nicely, every little thing will line up appropriately and be prepared to go!
If you are like my father and I, you&rsquoll occur throughout at the very least one that doesn&rsquot line up beautifully.
For this, we cheated a minor bit and secured the standoff to the frame and utilised a glue dot to secure it to the wall, so it didn&rsquot move.
We only experienced to do this for two corners of two frames, but don&rsquot be concerned if you mess up one&hellip We&rsquove been there! 
11. REVEL IN THE Concluded Item!
Now it&rsquos time to take pleasure in your function!
We did a grid of nine complete photos which was a significant enterprise with all the measuring, but I&rsquom in love with how it turned out.
Enable me know in the comments what you think of the completed product or service!